The chair strip part of the garden chair

1、 Wooden chair strip
1. Cut the logs into the required specifications for the chair strips and dry them. After natural air drying or steam drying, a series of treatments should be carried out to ensure the flatness of the chair strips before painting can be carried out;
2. The paint treatment is roughly as follows: After spraying the wood with a few coats of primer, use polishing equipment to remove burrs on the surface of the wood, and then spray the top coat, which should be uniform and consistent.
2、 Plastic wood chair strip
1. Mix with PE, PP, PS and wood powder;
2. Put the powder into the wood plastic extrusion equipment, heat it up, and then shape it into the size of the chair strip.
3、 Plastic wooden chair strip
1. Use HDPE with a small amount of PP and PS to make particles;
2. Mix the particles with the color masterbatch powder and put them into the extrusion equipment, heat them up, and then shape them into the size of the chair strip.
4、 Other materials
1. Anticorrosive wood, after special anti-corrosion treatment, has the effects of anti-corrosion, termite resistance, and fungal resistance. The anti-corrosion effect varies depending on the process.
2. Carbonized wood, also known as heat treated wood, is the process of carbonizing the effective nutrients of wood. In fact, the earliest carbonized wood was the bottom processing technology of wooden power poles, and I believe everyone has some understanding.